INTRODUCTION
The EPS208 high-pressure common rail test bench imitates diesel engine ECU (Engine Control Unit), and provides common rail system control signals (CP1/CP2/ CP3/ HP3/ HP4/ DELPHI), such as Bosch, Denso, Delphi, and Siemens, to drive high-pressure common rail. The oil pump and the high-pressure common rail injector are working, and the driving signal parameters can be set by the user according to their actual conditions, and can be grouped and saved, which is convenient for maintenance personnel to judge and repair the working state of the high-pressure common rail system.
CHARACTERISTIC（特性）
(1) While supporting high-speed solenoid valve type common rail
injectors, it also
supports the third-generation high-pressure common rail
Technical piezoelectric crystal common rail injector;
1.支持高速电磁阀共轨喷油器和压电晶体共轨喷油器的第三代高压共轨技术 ;
(2) Single-channel common rail injector;
2.单通道共轨喷油器;
(3) Support multiple rail pressure sensors (BOSCH/DENSON/DELPHI);
3.支持多轨压力传感器 (BOSCH/DEOSN/DELPHI);
(4) Intelligent PID algorithm, more precise pressure control;
4.智能 PID 算法，压力控制更精确;
(5) Short-circuit protection in both software and hardware makes the
machine more reliable;
5. 硬件和软件短路保护，机器更可靠;
(6) Multiple language options;
6. 多语种选择，中文/英文/俄文;
(7) Safety protection design to prevent misoperation by operators, making
it safer to use
7.安全防护设计，防止操作人员误操作，使用更加安全。
(8) Not only can the flow sensor be used to display the flow from the
computer, but also the flow can be displayed from the graduated cylinder.
8 流量传感器不仅可以用来显示来自计算机的流量，还可以显示来自刻度气缸的流量。
FUNCTION（功能）
(1) Test the sealing performance of the common rail injector
1. 共轨喷油器密封性能测试。
(2) Test the full load performance of the common rail injector
2. 测试共轨喷油器的满载性能。
(3) Test the mid-load performance of common rail injectors
3.测试共轨喷油器的中载性能。
(4) Test the idling performance of the common rail injector
4.共轨喷油器怠速性能测试。
(5) Test the pre-injection performance of the common rail injector
5. 共轨喷油器预喷射性能测试
TECHNICAL PARAMETER（技术参数）
(1) Measuring motor speed: 0～3000rpm; oil pump speed: 0--1500rpm
(1)测量电机转速：0~3000rpm；油泵转速：0～～1500rpm
(2) Working pressure: 0-200MPa
(2)工作压力：0-200MPa
(3) Fuel tank volume: 10L;
(3)油箱容积：10L；
(4) Test oil filtering accuracy: 3μ;
(4)测试滤油精度：3μ；
(5) Oil measuring method: flow meter
(5)测油方法：流量计
(6) Power supply: 220V/50HZ;
(6)电源：220V/50HZ；
(7) Common rail pump type: CP1H;
(7)共轨泵类型：CP1H；
(8) Output power: 2.6KW
（8）输出功率：2.6 KW(9) Overall dimensions (mm):; 920*850*800
（9）外形尺寸（mm）：；920*850*80
(10) Net weight: 158Kg.
（10）重量：158Kg